All-Out Graphics
1195 Esquimalt Avenue, West Vancouver, BC, CANADA V7T 1K2
Tel/Fax 604 922 2392 Toll Free 1.877.922. 2392
email: manfred@allout-graphics.com
Home
|
Burnishing |
|
After separating the protective backing sheet from the transfer sheet
(transfer base) the rubdown transfer is placed, adhesive side down, on
the chosen substrate (paper, wood, metal, plastic, glass etc). Rubbing
the burnisher back and forth while holding the transfer base securely in
place causes adhesion of the image. The transfer base turns slightly
milky where the transfer occurred, thereby revealing the areas that may
have been missed. Finally, bending back a corner of the carrier sheet
and slowly peeling it away, exposes the transferred image. To ensure
smooth, permanent adhesion, the protective backing sheet should be
placed over the image and burnished again.
|
|